How configure a wireless sensor extender
Posted: Tue Feb 08, 2011 10:53 am
Model: XY110A
Steps:
1. Put aside repeater first, learn your sensors to your alarm panel as normal
2. Test your sensor can trigger the alarm
3. Now power the repeater
4. Press the SET button at the back of the repeater, indicator flashes, ready to learn
5. Trigger your sensor, indicator light off, means learnt
6. Now all ready
* Repeater should be put within the max. reach of your sensors but the repeater could be far from panel, max. distance is 3000m but this varies if there are obstacles in between*
Steps:
1. Put aside repeater first, learn your sensors to your alarm panel as normal
2. Test your sensor can trigger the alarm
3. Now power the repeater
4. Press the SET button at the back of the repeater, indicator flashes, ready to learn
5. Trigger your sensor, indicator light off, means learnt
6. Now all ready
* Repeater should be put within the max. reach of your sensors but the repeater could be far from panel, max. distance is 3000m but this varies if there are obstacles in between*