Learn sensors for GSM Alarm YL07M2A
Posted: Fri Nov 26, 2010 1:12 am
Model: YL07M2A
Coding of Defense Zone
Wireless detectors have to be learnt to the alarm panel in order to trigger alarm.
- enter setup mode,
- use keypad to input [23], input the defense zone number you want to
code [01~99],
- and then input [#] to confirm.
- alarm panel gives a long beep to confirm and the corresponding defense zone is displayed on the screen. You will also hear a voice prompt “trigger detector”.
- Then trigger a wireless detector to send a wireless signal;
- after receiving the signal, alarm panel gives a long beep, and you will hear “coding
finished” to confirm receipt.
Coding of Defense Zone
Wireless detectors have to be learnt to the alarm panel in order to trigger alarm.
- enter setup mode,
- use keypad to input [23], input the defense zone number you want to
code [01~99],
- and then input [#] to confirm.
- alarm panel gives a long beep to confirm and the corresponding defense zone is displayed on the screen. You will also hear a voice prompt “trigger detector”.
- Then trigger a wireless detector to send a wireless signal;
- after receiving the signal, alarm panel gives a long beep, and you will hear “coding
finished” to confirm receipt.