CXG4D: How reset GSM Alarm to factory setting
Posted: Mon Feb 08, 2010 9:46 am
1) turn off the power
2) press and hold the RESET button at the back, while power on the alarm until RED indicator on and then turn flashing
3) wait for a while
4) indicator stable and all settings should have been cleared
* you can use a remote control to test if signal can be received by alarm, if not, everything is clear.
2) press and hold the RESET button at the back, while power on the alarm until RED indicator on and then turn flashing
3) wait for a while
4) indicator stable and all settings should have been cleared
* you can use a remote control to test if signal can be received by alarm, if not, everything is clear.