Search found 1912 matches

by admin
Mon Jul 18, 2011 9:27 am
Forum: RFID and Internet of Things
Topic: SDK of OS8 RFID UHF 915 MHz
Replies: 0
Views: 50904

SDK of OS8 RFID UHF 915 MHz

by admin
Fri Jul 15, 2011 10:29 am
Forum: Problems about Burglar Alarm
Topic: How remote control coding?
Replies: 0
Views: 51487

How remote control coding?

Image
by admin
Sun May 22, 2011 9:00 am
Forum: Problems about Security Guard Solutions
Topic: The clock of Guard Tour System not correct
Replies: 0
Views: 50260

The clock of Guard Tour System not correct

Model: SO4E, SO3E, SO3E10T, UD3E10T The handheld reader (wand) of the Guard Tour System not maintained a clock internal itself, it relies on the clock of the computer connecting to download the data synchronizing the time of records. The wand has its own design, it should follow a certain procedure ...
by admin
Fri May 06, 2011 11:00 am
Forum: Problems about Burglar Alarm
Topic: How set up phone number for SMS and calling upon alert
Replies: 0
Views: 53742

How set up phone number for SMS and calling upon alert

Model: LMS3, LMS3D, LMS35D, LMS3D5D 1) install SIM card 2) using a phone, call in to make sure the GSM connection ok 3) send SMS command to make sure SMS and calling upon alert is enabled 1234121# 4) send SMS command to input first phone number for voice calling (optional) 12343112345678# * where 12...
by admin
Thu Apr 07, 2011 4:17 am
Forum: Problems about Access Control Products
Topic: Magnetic Lock Vs. Electronic Strike
Replies: 0
Views: 50318

Magnetic Lock Vs. Electronic Strike

Magnetic locks and electric strikes are electrical hardware devices used to maintain the security of a door opening. Both of these devices can be activated by a range of tools, including passcodes, biometric readers, keycards or buzzers. When comparing magnetic locks to electric strikes, consider fa...
by admin
Mon Mar 28, 2011 7:57 am
Forum: Problems about Using Accessories
Topic: Troubleshooting GPS Tracker
Replies: 0
Views: 51005

Troubleshooting GPS Tracker

1) where are you? 2) which SIM provider you're using? what kind of card? 3) your SIM card put inside normal mobile phone, do you want put in password (or any steps) before dialing your number? 4) have you charged the gps tracker? 5) do you see a LED indicator of the GPS with power? it's flashing. 6)...
by admin
Sun Mar 20, 2011 1:05 pm
Forum: Problems about Burglar Alarm
Topic: SMS reporting 123420# , 123421# and 123480# not working
Replies: 0
Views: 50492

SMS reporting 123420# , 123421# and 123480# not working

Model: LMS3, LMS3D, LMS35D, LMS3D5D We found there is difficulty for users in certain countries unable to use this group of commands. The reason behind so far not understood, we may have future version having these commands re-design to solve the problem. However, you can do some tests to verify if ...
by admin
Sat Mar 19, 2011 6:49 am
Forum: Problems about Access Control Products
Topic: Comprehensive Tutorial about Access Control System
Replies: 0
Views: 50593

Comprehensive Tutorial about Access Control System

Model: UD7001,UD7002,UD7004,UD7001N,UD7002N,UD7004N

A very good tutorial about access control worth reading.

http://en.wikipedia.org/wiki/Access_control
by admin
Fri Mar 04, 2011 2:00 am
Forum: Problems about Security Guard Solutions
Topic: Guard Tour System Best Practices
Replies: 0
Views: 50300

Guard Tour System Best Practices

Model: SO4E, WM5A, UD3E10T Here are some suggestions based on our twenty-plus years working with security managers. We hope you find them useful. Define Your Objectives Your officers may be doing guard tours already — if so, this is a good time to review the risks your facility faces and whether gua...
by admin
Fri Mar 04, 2011 1:57 am
Forum: Problems about Security Guard Solutions
Topic: Guard Tour Solutions for Guard Companies
Replies: 0
Views: 49782

Guard Tour Solutions for Guard Companies

Model: WM5A, RO6V What do you need from your guard tour system supplier? "We want a partner – not just another vendor." There are lots of companies who can sell you a guard control system. At TimeKeeping Systems, we believe in a different approach. Our goal is to help you retain current cl...
by admin
Fri Mar 04, 2011 1:52 am
Forum: Problems about Security Guard Solutions
Topic: Can EMID signal cards be used on metal surfaces?
Replies: 0
Views: 49761

Can EMID signal cards be used on metal surfaces?

Model: BS6A, BS5C Since non-contact signal cards rely on electromagnetic waves to transmit power and data, their effective reading distance can be shortened when used on metal surfaces. When the cards placed on less conductive metals such as iron, the effect is minimal, and the cards can be used nor...
by admin
Sat Feb 26, 2011 10:00 am
Forum: RFID and Internet of Things
Topic: Brochure for DS1900 iButton
Replies: 0
Views: 48919

Brochure for DS1900 iButton

Model: WM5A, smc1900a15fx10, smc1900a15fx20, smc1900a15fx50

http://www.best-china-security-supplies ... ds1900.pdf
by admin
Fri Feb 25, 2011 12:42 am
Forum: Problems about Burglar Alarm
Topic: can't find a description for the ports LB- and LB+
Replies: 0
Views: 50306

can't find a description for the ports LB- and LB+

Model: YL07M2B

the LB- and LB+ is for a two-way conversation speaker, input 12V dc
by admin
Tue Feb 08, 2011 10:53 am
Forum: Problems about Burglar Alarm
Topic: How configure a wireless sensor extender
Replies: 0
Views: 50016

How configure a wireless sensor extender

Model: XY110A Steps: 1. Put aside repeater first, learn your sensors to your alarm panel as normal 2. Test your sensor can trigger the alarm 3. Now power the repeater 4. Press the SET button at the back of the repeater, indicator flashes, ready to learn 5. Trigger your sensor, indicator light off, m...
by admin
Fri Jan 28, 2011 1:17 pm
Forum: Problems about Burglar Alarm
Topic: Setting 2262 door sensors
Replies: 0
Views: 49945

Setting 2262 door sensors

Model: LMS3, LMS3D

Working with the S3 panel requires correct setting of jumpers D0 to D3

Image

From bottom D3 to D0 is skip - high - skip - high
by admin
Wed Jan 19, 2011 1:25 pm
Forum: Problems about Burglar Alarm
Topic: the dialer work only when the landline off?
Replies: 0
Views: 49380

the dialer work only when the landline off?

Model: NH1900B, NH1900C, NH900B, NH900C


No, there is not an auto-switchable feature, dialer will dial out only using GSM connection.
by admin
Wed Jan 19, 2011 1:24 pm
Forum: Problems about Burglar Alarm
Topic: any difference between the two phone plugs of the dialer?
Replies: 0
Views: 49161

any difference between the two phone plugs of the dialer?

Model: NH1900B, NH1900C, NH900B, NH900C

Two two phone sockets are the same. One can connect to alarm for dial out, one to an analog phone set for voice calling.
by admin
Wed Jan 12, 2011 9:18 am
Forum: Problems about Burglar Alarm
Topic: What's the input voltage of fire alarm?
Replies: 0
Views: 48767

What's the input voltage of fire alarm?

Model: NH110

thanks for your enquiry.

sorry for the marking confusion, it marks the max.
actually the unit is operable from 9V to 24V DC,
you can try it works. anyway, anything lower than
24V the max no harm to the unit.

you can try it, can alarm.
by admin
Mon Jan 03, 2011 4:58 am
Forum: Problems about Security Guard Solutions
Topic: Indicators of WM5V iButton Guard Reader
Replies: 0
Views: 49789

Indicators of WM5V iButton Guard Reader

Model: WM5V 1 Di: read success 2 Di: reader flash memory almost full warning 3 Di: flash saving error, need retry 6 Di: flash memory full, need download & clear 12 Di: internal clock failure, need return to factory for repair Downloader: 3 Indicators: Receive, Transmit and Power Internal recharg...
by admin
Mon Dec 27, 2010 11:56 am
Forum: Problems about Burglar Alarm
Topic: Simple test to verify the firmware version of S3 GSM Alarm
Replies: 0
Views: 49090

Simple test to verify the firmware version of S3 GSM Alarm

Model: LMS3, LMS3D please take a simple test for me. - no need to put in SIM - fix antenna & plug the adapter, turn on the units - observe how the LED flashes (this is the self-test) on panel 1) z1 to z6 flashes one by one and ONLY once after power up, no more flashes on Z1 to Z6 and no recycle ...
by admin
Mon Dec 27, 2010 8:37 am
Forum: Problems about Burglar Alarm
Topic: How force a full reset of S3 GSM Alarm
Replies: 0
Views: 49988

How force a full reset of S3 GSM Alarm

Model: LMS3, LMS3D If the users forget password, to restore the device need to use Forced Restore. Steps are Turn off the back-up battery switch and AC power Press and hold RESET button at the back while turn on the power Keep press and hold the RESET button for about 5 seconds until the buzzer give...
by admin
Thu Dec 23, 2010 2:10 pm
Forum: Problems about Access Control Products
Topic: Pin assignment of RFID Long Range Reader
Replies: 0
Views: 50440

Pin assignment of RFID Long Range Reader

Model: DP135RBP

Red: +12V DC
Black: -12V DC
White, Yellow: Wiegand D0 and D1
Green, Brown: Logical output 5V 10mA
by admin
Tue Dec 21, 2010 9:26 am
Forum: Physical Security
Topic: How outdoor pan-tilt controlled by DVR
Replies: 0
Views: 50370

How outdoor pan-tilt controlled by DVR

Model: SS301D

normal dvr control ptz via rs485, however, most pan-tilt is without built-in decoder for decoding rs485 signal (including this one) . In this case, you need an external decoder in between, so dvr can control pan-tilt unit that supports no rs485.
by admin
Sun Dec 19, 2010 10:58 pm
Forum: Problems about Security Guard Solutions
Topic: what operating system can run patrol guard system
Replies: 0
Views: 50231

what operating system can run patrol guard system

Model: UD3E10T, SO3E, WM5E, ROZ6, RO6V

Up to the moment, all patrol guard systems are only Windows XP certified. Other platforms including Macintosh, Windows 7 and 64-bit systems not guarantee work.
by admin
Wed Dec 15, 2010 5:38 am
Forum: Problems about Burglar Alarm
Topic: How setup delay arm and disarm from YL07M2A GSM Panel
Replies: 0
Views: 53161

How setup delay arm and disarm from YL07M2A GSM Panel

Model: YL07M2A There is no delay arm & disarm feature for YL07M2A panel. Workaround: 1. use remote control keyfob to arm and disarm after leaving house or before entering house; or 2. use mobile phone calling in to disarm or arm the panel. Make sure the sensors not triggered due to opening of do...
by admin
Tue Nov 30, 2010 11:58 am
Forum: Problems about Access Control Products
Topic: What software is required for the reader?
Replies: 0
Views: 49753

What software is required for the reader?

Model: DP100D, UDDHX there is actually no proprietary software bundled. It reads the card no. as output. It should either using with access controller system or collecting to computer. Connecting with access controller is using Wiegand Connecting with computer is using RS485 You need to mention what...
by admin
Fri Nov 26, 2010 2:36 am
Forum: Problems about Burglar Alarm
Topic: M2A GSM Alarm Power Off Notification
Replies: 0
Views: 48578

M2A GSM Alarm Power Off Notification

Model: YL07M2A

- This model with built-in backup battery
- Upon AC power outage, system will detect and switch to backup power from battery
- SMS alert will be sent as notification
by admin
Fri Nov 26, 2010 1:33 am
Forum: Problems about Burglar Alarm
Topic: How S3 GSM Alarm operate At-Home and Away Alarm Mode
Replies: 0
Views: 48921

How S3 GSM Alarm operate At-Home and Away Alarm Mode

Model: LMS3, LMS3D At-Home Alarm is for some sensors to be still active while owner is at home, moving around inside certain area of home will not trigger the corresponding sensors Away Alarm is for all sensors in active while owner not at home. Step: 1) learn sensors to different zone 2) use SMS co...
by admin
Fri Nov 26, 2010 1:27 am
Forum: Problems about Burglar Alarm
Topic: How setup multiple levels of defense zones
Replies: 0
Views: 49237

How setup multiple levels of defense zones

Model: LMS3, LMS3D Multiple levels of defense zones can be set using the SMS command [60]+[AA]+ +[C]+[#] - AA is double subarea and 01 to 06 means defense districts 1 to 6. - B means the type of defense district. 1 means normal defense district, 2 means at-home defense district, 3 means intelligent ...
by admin
Fri Nov 26, 2010 1:12 am
Forum: Problems about Burglar Alarm
Topic: Learn sensors for GSM Alarm YL07M2A
Replies: 0
Views: 48564

Learn sensors for GSM Alarm YL07M2A

Model: YL07M2A Coding of Defense Zone Wireless detectors have to be learnt to the alarm panel in order to trigger alarm. - enter setup mode, - use keypad to input [23], input the defense zone number you want to code [01~99], - and then input [#] to confirm. - alarm panel gives a long beep to confirm...
by admin
Wed Nov 24, 2010 11:38 am
Forum: Problems about Burglar Alarm
Topic: How delete sensors from alarm panel
Replies: 0
Views: 48369

How delete sensors from alarm panel

Model: LMS3, LMS3D Defense district code deletion On the disarming status, enter into settling, skip remote controller coding, slightly press on [SET] key once, and defense district one indicating light shines. Thereafter, press [SET] key for three seconds and the host computer “clanks” for a long t...
by admin
Tue Nov 09, 2010 11:58 am
Forum: Problems about Burglar Alarm
Topic: Door sensors and motion detector no signal out
Replies: 0
Views: 49292

Door sensors and motion detector no signal out

you can do some simple tests for troubleshooting

- swap the batteries
- observe the response of sensors to alarm panel, put them side by side
- open the sensors and check the jumpers settings - make them the same or follow those working
by admin
Tue Nov 09, 2010 10:43 am
Forum: Problems about Burglar Alarm
Topic: Some simple tests from troubleshooting of GSM Alarm
Replies: 0
Views: 48898

Some simple tests from troubleshooting of GSM Alarm

Model: LMS3, LMS3D, LMS3D5D, LMS35D First of all, can you use a phone to dial alarm, does it pick up you call? You don't need to set anything, put in the following SMS command 1) to play safe, firstly enable the SMS messaging 1234121# 2) send message to enquire the panel status 123420# 3) send messa...
by admin
Tue Nov 09, 2010 10:37 am
Forum: Problems about Network Camera
Topic: How NE series advantage over other China network cameras
Replies: 0
Views: 50295

How NE series advantage over other China network cameras

Model: NE448SH this series of network camera using H.264 compression is with audio & fixed D1 quality /w 25 fps for PAL NVS software is bundled supports up to 64 cam This manufacturer is ONVIF memeber, future released will be compatible with Axis application, but their products really cost-effec...
by admin
Fri Nov 05, 2010 2:04 pm
Forum: Problems about Burglar Alarm
Topic: Some suggestions for setting PIR motion detector pet immune
Replies: 0
Views: 48676

Some suggestions for setting PIR motion detector pet immune

There are many approaches from experience to set PIR motion detector pet immune, however, they cannot totally eliminate the happening of false alarm 1. adjust the angle and height of the detector installation so as to avoid your pet fall into the detected area - lowest cost, may be effective depends...
by admin
Thu Nov 04, 2010 6:28 am
Forum: Problems about Burglar Alarm
Topic: XYA4: How assign sensors to different zones
Replies: 0
Views: 48716

XYA4: How assign sensors to different zones

Model: XYA4 Assigning sensors to different zones requires corresponding jumper setting as diagram below http://www.best-china-security-supplies.com/images/xya4_11.jpg To refer to what's the D0, D1, D2, D3, please follow the photo below. You will see on the board H and L marks, that means the two pin...
by admin
Wed Nov 03, 2010 8:02 am
Forum: Problems about Standalone DVR
Topic: How enable user motion detection
Replies: 0
Views: 49205

How enable user motion detection

Model: XJ8104DH, XJ8108DH

Inside the menu choose "Advance" and then "MD"

Refer to hardcopy user manual page 21.
by admin
Tue Nov 02, 2010 12:29 am
Forum: Problems about Burglar Alarm
Topic: How connect wireless siren to 99 zones burglar alarm
Replies: 0
Views: 50542

How connect wireless siren to 99 zones burglar alarm

Model: LM288, LMS3, LMS3D, NX103W, NH103W, NH300SLW Most people they want wireless siren in order to skip the trouble of wiring. Our wireless sirens are designed for general use and basically can fit all alarm panel providing that has equipped with a siren port. Our wireless siren consists of two it...
by admin
Wed Oct 27, 2010 11:12 am
Forum: Problems about Burglar Alarm
Topic: SMS does not sent as set
Replies: 0
Views: 48891

SMS does not sent as set

Model: LMS3, LMS3D

Following the standard procedure to enter config mode (or using SMS), input password and issue the command to enable the sending SMS message.

12 + [0/1] #

0 is off
1 is on
by admin
Tue Oct 26, 2010 8:44 am
Forum: Physical Security
Topic: Local tes for PT series dome and motor
Replies: 0
Views: 50392

Local tes for PT series dome and motor

Model: PT3050DQ, PT0901 Narrow down the scope is important for any troubleshooting for a complicated CCTV installation. Try below test to do a simple test to decide whether pan-tilt itself go problem: 1) connecting only the suitable power to pan-tilt (mostly 24V AC 2A) 2) by adjusting the dip switch...
by admin
Mon Oct 25, 2010 11:03 am
Forum: Problems about Burglar Alarm
Topic: What happen If my neighbor have a same alarm?
Replies: 0
Views: 48461

What happen If my neighbor have a same alarm?

Basically the alarm will not crosses, it's because

1) the sensors and remote with unique ID must be learnt to record in your alarm panel
2) the wireless distance has a limit
by admin
Sun Oct 24, 2010 6:30 am
Forum: Problems about Burglar Alarm
Topic: False alarm from motion detectors
Replies: 0
Views: 48739

False alarm from motion detectors

Model: LMS3D, LMS3, XY801, FO89FT, D85

Due to the nature of the PIR technology, false alarm cannot be 100% eliminated. There comes a variety of sensors - based on PIR technology - with little adjustment in a hope to reduce the chance of occurence of false alarm.
by admin
Sun Oct 24, 2010 6:24 am
Forum: Problems about Burglar Alarm
Topic: How determine the use of motion detector and beam detector
Replies: 0
Views: 49587

How determine the use of motion detector and beam detector

Model: LMABT, FABT, LMABE, FABE, CXABM, FABM, LMS3D, LMS3 There are so many different motion detectors in the market because actually different kinds of detector have their only specific applications. Beam detector is designed for so-called perimeter defense ( can be classified as exterior defense )...
by admin
Wed Oct 20, 2010 4:13 am
Forum: Problems about Burglar Alarm
Topic: GSM Alarm: manual recording of voice message
Replies: 0
Views: 48720

GSM Alarm: manual recording of voice message

Model: LMS3, LMS3D, LMS35D, LMS3D5D - On the status of disarming, pressing [SET] key for three seconds, host computer “clanks” for a long time, then stop, the [arming] light flickers and the recording begins. - keep closed to the alarm panel within 30cm, use regular voice level and speak to record y...
by admin
Mon Oct 18, 2010 12:13 pm
Forum: Problems about Burglar Alarm
Topic: Major enhancement of S3 GSM Alarm to old versions
Replies: 0
Views: 49006

Major enhancement of S3 GSM Alarm to old versions

Model: LMS3, LMS3D, LMS35D, LMS3D5D The major enhancements of S3 to previous versions include (but no limited to): - faster operation - more user-friendly configuration steps - support either SMS command configuration or interactive command using analog phone - indicators clearly stated the zone tri...
by admin
Wed Oct 13, 2010 9:36 am
Forum: Problems about Burglar Alarm
Topic: 3 wired zones mean I can plug only 3 wire detectors
Replies: 0
Views: 48450

3 wired zones mean I can plug only 3 wire detectors

Model: LMS3, LMS3D, LMS3D5D, LMS35D The number of zones actually implies no limitation to the number of sensors connected. You can add as many as you want, just those sensors will be classified into 3 distinguishable zones - so to speak, if your system allow 3 wired zones and you set 6 sensors, you ...
by admin
Fri Oct 01, 2010 2:31 am
Forum: Problems about Burglar Alarm
Topic: LM808 Alarm: Amendment to Factory Reset Procedure
Replies: 0
Views: 48990

LM808 Alarm: Amendment to Factory Reset Procedure

Model: LM808, LM808A, LM80812D

regarding the factory reset, pls do one more thing

the panel actually wired input ( must either short circuit, used or disable ). so

please do inside config mode

730 + F4
by admin
Mon Sep 27, 2010 11:01 am
Forum: Problems about Burglar Alarm
Topic: Amendment to user guide S3 Alarm Panel for setting SMS alert
Replies: 0
Views: 49345

Amendment to user guide S3 Alarm Panel for setting SMS alert

Model: LMS3, LMS3D, LMS35D, LMS3D5D There is a typo mistake on manual. It relates to the SMS configuration command. The correct command pattern is that 1) commands sent via SMS is [password] + [command] + [parameter] + # e.g. setting SMS phone no. 1234379999999# 2) commands sent via phone interactiv...
by admin
Wed Sep 22, 2010 8:57 am
Forum: Problems about Access Control Products
Topic: User Guide for Contactless Card Management System
Replies: 0
Views: 50453

User Guide for Contactless Card Management System

Model: KA2001, KA2002, KA2004, KA2001N, KA2002N, KA2004N, UD7001, UD7002, UD7004, UD7001N, UD7002N, UD7004N

http://www.best-china-security-supplies ... ud7000.pdf
by admin
Wed Sep 15, 2010 1:12 am
Forum: Problems about Burglar Alarm
Topic: Using the relay to control lamp of home
Replies: 0
Views: 49002

Using the relay to control lamp of home

Model: LMS3, LMS3D, LMS3D5D, LMS35D

Image
by admin
Tue Sep 14, 2010 12:11 am
Forum: Problems about Burglar Alarm
Topic: Installation Checklist for GSM Dial Gateway
Replies: 0
Views: 49548

Installation Checklist for GSM Dial Gateway

Model: NH1900C, NH900C The installation is straight forward, just plug and go. Here's a checklist. - antenna is fastened - SIM card using is without password or any procedure to activate it - SIM card can be put into any mobile phone and able to dial out and receive call right away - the power adapt...
by admin
Wed Sep 08, 2010 3:58 am
Forum: Physical Security
Topic: are these ptz cctv camera with all pan-tilt-zoom functions
Replies: 0
Views: 49843

are these ptz cctv camera with all pan-tilt-zoom functions

Model: JG8036MT, FQ4227M, FQ4230, FQ4236, BC-6027MT, FQ4827 The term PTZ Camera actually present the camera is with PTZ capability. However, 1) the zoom ability is built-in 2) the pan-tilt ability requires an additional pan-tilt unit. the camera offer RS485 interface for implementing these few funct...
by admin
Wed Sep 08, 2010 12:01 am
Forum: Physical Security
Topic: What other Hardware and Software is required this camera?
Replies: 0
Views: 51755

What other Hardware and Software is required this camera?

Model: TC-108CDJK

To have this camera operating properly, you should have other basic equipment including:

1) 12V DC 1A power adapter (supply)
2) Monitor with BNC connection for video in
3) Cabling.
by admin
Mon Sep 06, 2010 1:52 pm
Forum: Problems about Burglar Alarm
Topic: How standalone Gas Detector works GA2008W
Replies: 0
Views: 48779

How standalone Gas Detector works GA2008W

Model: GA2008W Question: This alarm works if we connect 12v + and - and no connection to other cables? use as a simple gas detection alarm. Answer: Yes, it can be used as standalone gas detection alarm with connection to alarm. Just connect the 12v + and -. However, 1) connecting to alarm panel via ...
by admin
Fri Sep 03, 2010 2:24 pm
Forum: Product Manual
Topic: User Guide: S3 GSM Alarm Panel
Replies: 0
Views: 50519

User Guide: S3 GSM Alarm Panel

Model: LMS3, LMS3D, LMS35D, LMS3D5D

http://www.best-china-security-supplies ... g_lms3.pdf
by admin
Fri Sep 03, 2010 3:22 am
Forum: Problems about Burglar Alarm
Topic: Connecting siren to burglar alarm
Replies: 0
Views: 51744

Connecting siren to burglar alarm

Model: CXG4D, NHG9D, LMG3, LMG3T, LMS3, LMS3D, LMS35D, LMS3D5D, CXG4D5D Connecting external siren or buzzer to GSM Alarm Panel is easy, first identify the two ports for siren (one as Ground and another one is input) from the back panel of GSM Alarm Panel - they're mostly at the leftmost two ports of...
by admin
Wed Sep 01, 2010 1:57 pm
Forum: Problems about Burglar Alarm
Topic: Sensors Setting for 816 Series Alarm
Replies: 0
Views: 49059

Sensors Setting for 816 Series Alarm

Model: LM0816, LM808

Before learning the sensors to alarm panel, please set jumpers first.

- D0-D3 must follow
- 8 ID rows, randomly assign
- Resistance 3.3

Image
by admin
Wed Sep 01, 2010 10:49 am
Forum: Problems about Access Control Products
Topic: How can i use this device when there is no software?
Replies: 0
Views: 49341

How can i use this device when there is no software?

Model: UD09BW UD09BWM1 series USB Card Reader Question: the device from you but there is no software cd with this unit. How can i use this device when there is no software and drivercd with it. According to the object description this should be included. Answer: - There are several version of this m...
by admin
Tue Aug 31, 2010 12:27 am
Forum: Product Manual
Topic: Manual of VS Series Motorized CCTV Lens
Replies: 0
Views: 50016

Manual of VS Series Motorized CCTV Lens

Model: VS0660M, VS0660MA, VS0636M, VS0636MA

http://www.best-china-security-supplies ... s0660m.pdf
by admin
Mon Aug 30, 2010 12:33 pm
Forum: Problems about Network Camera
Topic: How do you set the ip-ports for the 4 individual video input
Replies: 0
Views: 50146

How do you set the ip-ports for the 4 individual video input

Model: YY4F Question: How do you set the ip-ports for the 4 individual video inputs? I have a need for a device like this using (http://blueirissoftware.com/index.html) software. The individual camera setups can use the same ip, but need unique port numbers. Answer: i check that video output is a QC...
by admin
Sat Aug 28, 2010 7:26 am
Forum: Problems about Burglar Alarm
Topic: How a wireless siren work with a alarm panel
Replies: 0
Views: 48719

How a wireless siren work with a alarm panel

Model: NH300SLW, NX103W, XY103W Most people they want wireless siren in order to skip the trouble of wiring. Our wireless sirens are designed for general use and basically can fit all alarm panel providing that has equipped with a siren port. Our wireless siren consists of two items: a small transmi...
by admin
Fri Aug 20, 2010 1:27 am
Forum: Physical Security
Topic: Pan-Tilt Dome not moving
Replies: 0
Views: 49416

Pan-Tilt Dome not moving

Model: PT0901Q

1) is there a lock need to remove on the pan-tilt
2) is the protocol matched both sides
3) is the 485 wires reversed
4) are you besides the pan-tilt unit or the pan-tilt remote
by admin
Thu Aug 19, 2010 10:07 am
Forum: Problems about Burglar Alarm
Topic: Quick Starter Guide : S3 GSM Alarm Panel
Replies: 0
Views: 49843

Quick Starter Guide : S3 GSM Alarm Panel

Configuration of the S3 GSM alarm panel is ever the most friendly panel. It's easy. All unit we ship out has been configured, but in case you do it yourself and looks not working, we suggest having the unit reset and everything start-over in order not to be confused. 1) take one door sensor out. che...
by admin
Mon Aug 09, 2010 12:29 pm
Forum: Problems about Network Camera
Topic: Does the network camera NE series support Mac platform?
Replies: 0
Views: 49807

Does the network camera NE series support Mac platform?

Unfortunately NO at this moment. At the moment, NE series network camera basically supports only IE browser. Because there are relatively fewer users using Safari, no manufacturers really interested in allocating resources and develop DVR software for Macintosh platform. I would suggest Macintosh us...
by admin
Tue Jul 27, 2010 11:30 am
Forum: Problems about Burglar Alarm
Topic: User Guide for Wireless PIR Motion Detector XYA
Replies: 0
Views: 48586

User Guide for Wireless PIR Motion Detector XYA

Model: XYA http://www.best-china-security-supplies.com/images/xya_01.jpg 1) the top resistant choice: only one of three 2) the middle id address: random put in your jumpers 3) the bottom the mode of operation: actually defined and depends on your panel the easiest approach is to open an existing sen...
by admin
Sun Jul 25, 2010 9:53 am
Forum: Problems about Burglar Alarm
Topic: How test the dual photoelectric beam motion detector
Replies: 0
Views: 48301

How test the dual photoelectric beam motion detector

Testing the dual beam detector is easy, having them correctly power via suitable voltage DC supply, stand face to face on table first, observe the indicators. http://www.best-china-security-supplies.com/download/fabt_led1.jpg http://www.best-china-security-supplies.com/download/fabt_led2.jpg Then co...