Model: KAVRI
Code learning
Open the door, turn on and off ACC for 3 times in 5 seconds, and stays ON at the last time. The siren will sound 3 times which indicates the system is leaning the code. Once the responder has a code the siren will sound once. The system can learn 4 code at most.
Search found 1912 matches
- Thu Jul 22, 2010 3:35 am
- Forum: Problems about Access Control Products
- Topic: How Car Immobilizer learn more RFID Key or Card
- Replies: 0
- Views: 50332
- Fri Jul 16, 2010 2:41 pm
- Forum: Problems about Burglar Alarm
- Topic: How learn remote control to control panel 816
- Replies: 0
- Views: 50043
How learn remote control to control panel 816
model: JA0816, LM0816, LM0816-12D At first, make sure essential accessories are connected correctly. 1) 16.5V AC power connected 2) keyboard connect and can control 3) no bad contacts of equipment 4) all wired zones on the panel have been closed by resistors (if no wired sensors are connected) 5) an...
- Thu Jul 15, 2010 3:52 am
- Forum: Product Manual
- Topic: manual for RS232 to RS485 converter
- Replies: 0
- Views: 49889
- Tue Jul 13, 2010 1:25 pm
- Forum: Product Manual
- Topic: Manual for Fingerprint Biometrics Lock KF3398
- Replies: 0
- Views: 49990
- Sat Jul 10, 2010 3:18 am
- Forum: Software Download
- Topic: Software pack for YY series MPEG-4 Network Camera
- Replies: 0
- Views: 51659
- Thu Jul 01, 2010 2:23 am
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: How set Schedule Arm/Disarm
- Replies: 0
- Views: 50082
GSM Alarm: How set Schedule Arm/Disarm
Applicable models:
CXG4D, CXG4D5D
Send SMS:
123456#31#2200#0800#
Above:
123456: default password
31: schedule arm command
2200: local time 10 pm (to arm)
0800: local time 8 am (to disarm)
before set this schedule, align the clock to system by
123456#31#
CXG4D, CXG4D5D
Send SMS:
123456#31#2200#0800#
Above:
123456: default password
31: schedule arm command
2200: local time 10 pm (to arm)
0800: local time 8 am (to disarm)
before set this schedule, align the clock to system by
123456#31#
- Wed Jun 30, 2010 1:58 pm
- Forum: Problems about Burglar Alarm
- Topic: AYG3: Assign different zone number to different sensors
- Replies: 0
- Views: 49946
AYG3: Assign different zone number to different sensors
This article applies to the following models: AYG3 CXG3 LMS3, LMS3D, LMS35D, LMS3D5D For those systems ordered from us, we assign all sensors a default zone number, you can easily change it if it does not fit your need. This will applies to wireless accessories including door sensor, motion detector...
- Wed Jun 30, 2010 9:50 am
- Forum: Problems about Standalone DVR
- Topic: Troubleshoot no video issue of 8100 series DVR
- Replies: 0
- Views: 49891
Troubleshoot no video issue of 8100 series DVR
Applicable models: XJ8104DH, XJ8104D5G, XJ8108DH, XJ8108D5G, XJ8004, XJ9104, XJ9216 * Actually the issue is quite general and can be applied to majority of DVR. Can you give us more information? 1) there is video and all normal when view from locally connected LCD or TV via VGA or Video-out. 2) ther...
- Fri Jun 25, 2010 2:29 am
- Forum: Problems about Security Guard Solutions
- Topic: Patrol Tour Management v1.1A (Ed. 201006) for z6 TM card
- Replies: 0
- Views: 50661
Patrol Tour Management v1.1A (Ed. 201006) for z6 TM card
http://www.best-china-security-supplies ... 201006.zip
Applicable models: ROZ6, WM5A
Supported OS:
Windows XP
* Windows 7 and Vista are not certified.
Applicable models: ROZ6, WM5A
Supported OS:
Windows XP
* Windows 7 and Vista are not certified.
- Thu Jun 24, 2010 9:51 am
- Forum: Product Manual
- Topic: User Guide for NE MPEG-4 Series Network Camera
- Replies: 0
- Views: 49960
User Guide for NE MPEG-4 Series Network Camera
For PC Client Side:
http://www.best-china-security-supplies ... eg4_pc.pdf
For IE Side:
http://www.best-china-security-supplies ... eg4_ie.pdf
Applicable model:
NE9120
NE9120x27
NE9246
NE9426X10L8
NE9426X100L8
NE210S
http://www.best-china-security-supplies ... eg4_pc.pdf
For IE Side:
http://www.best-china-security-supplies ... eg4_ie.pdf
Applicable model:
NE9120
NE9120x27
NE9246
NE9426X10L8
NE9426X100L8
NE210S
- Thu Jun 24, 2010 9:49 am
- Forum: Software Download
- Topic: Software pack for NE series MPEG-4 Network Camera
- Replies: 0
- Views: 50069
Software pack for NE series MPEG-4 Network Camera
http://www.best-china-security-supplies ... _mpeg4.zip
Applicable model:
NE9120
NE9120x27
NE9246
NE9426X10L8
NE9426X100L8
NE210S
Applicable model:
NE9120
NE9120x27
NE9246
NE9426X10L8
NE9426X100L8
NE210S
- Thu Jun 24, 2010 2:08 am
- Forum: Software Download
- Topic: XP Driver for TW 6802 Chipset DVR Card
- Replies: 0
- Views: 49676
- Wed Jun 23, 2010 2:01 pm
- Forum: Product Manual
- Topic: User Guide for GSM SMS Alarm P11
- Replies: 0
- Views: 50292
- Fri Jun 11, 2010 10:41 am
- Forum: Software Download
- Topic: NE210S: IP Camera Client for NE MPEG4 Series 20100610
- Replies: 0
- Views: 50254
NE210S: IP Camera Client for NE MPEG4 Series 20100610
http://www.best-china-security-supplies ... 100610.zip
It is applicable to MPEG4 series of IP products.
It is applicable to MPEG4 series of IP products.
- Wed Jun 09, 2010 10:04 am
- Forum: Physical Security
- Topic: PT3030: How adjust the max. horizontal span of the pan-tilt
- Replies: 0
- Views: 49705
- Mon Jun 07, 2010 11:23 pm
- Forum: Problems about Burglar Alarm
- Topic: GA2008W1: Gas Leakage Detector for Wired Alarm
- Replies: 0
- Views: 50240
GA2008W1: Gas Leakage Detector for Wired Alarm
For this model, it's particulary designed for wired burglar alarm signalled via NC or NO. This version cannot be used in a standalone setup. In addition to connecting 12Volts to red & -ve to black, it's required to connect also either NC or NO with COM to your burglar alarm to detect flammable g...
- Sat Jun 05, 2010 8:41 am
- Forum: Product Manual
- Topic: User Guide: Universal Pan-Tilt Decoder Board for CCTV RS485
- Replies: 0
- Views: 50653
- Sat Jun 05, 2010 4:05 am
- Forum: Product Manual
- Topic: JR895 CCTV Tester : Manual
- Replies: 0
- Views: 49894
- Wed May 26, 2010 3:56 am
- Forum: Product Manual
- Topic: AYG3: What is major diference of AYG3 to other GSM Alarm
- Replies: 0
- Views: 49933
AYG3: What is major diference of AYG3 to other GSM Alarm
Advantages of AYG3 GSM Alarm: Claimed the most cost-effective GSM Alarm solution for home and small office use. Newly released in 2010 with enhancements to shortcoming of old models. How? keep reading Supported 3 levels of defense: 24 Hours always-on Arming, At-Home Arming and Away Arming. More User...
- Fri May 21, 2010 3:05 am
- Forum: Product Manual
- Topic: BB4X: CCTV PTZ Keyboard Controller Manual
- Replies: 0
- Views: 50348
- Fri May 21, 2010 2:35 am
- Forum: Product Manual
- Topic: BB2X: CCTV PTZ Keyboard Controller Manual
- Replies: 0
- Views: 50233
- Fri May 14, 2010 7:43 am
- Forum: Problems about Security Guard Solutions
- Topic: RO6V: Patrol system V1.1 for RFID Guard Tour System
- Replies: 0
- Views: 50244
- Fri May 14, 2010 7:42 am
- Forum: Product Manual
- Topic: RO6V: User Guide for RFID Guard Tour System
- Replies: 0
- Views: 50180
- Wed May 12, 2010 12:20 pm
- Forum: Problems about Burglar Alarm
- Topic: Setup and Configure wireless smoke detector
- Replies: 0
- Views: 49451
Setup and Configure wireless smoke detector
This applicable to LM, CX, NH and JA series GSM Alarm. 1) I assume you want the smoke detector always on 24 hours. Double check if 4 jumpers of mode settings is setting liked this. http://www.best-china-security-supplies.com/images/smoke_2262_24hr.jpg 2) Put in the 9V battery 3) Press and hold the T...
- Fri May 07, 2010 5:22 am
- Forum: Product Manual
- Topic: Manual of Mini DVR Series KD6
- Replies: 0
- Views: 49695
- Tue May 04, 2010 1:58 am
- Forum: Product Manual
- Topic: User Guide for Wifi CMOS PTZ Camera CS206
- Replies: 0
- Views: 49738
- Mon May 03, 2010 9:02 am
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: Assign different zone number to different sensors
- Replies: 0
- Views: 50415
GSM Alarm: Assign different zone number to different sensors
This article applies to the following models: NHG9D,NHG9D5D,NHG4D LMG9T, LMG3T, LMG3T5D, LMG2, LMG35D, LMG25D CXG4D,CXG4D5D For those systems ordered from us, we assign all sensors a default zone number, you can easily change it if it does not fit your need. This will applies to wireless accessories...
- Fri Apr 30, 2010 7:25 am
- Forum: Announcement
- Topic: Shipping delay to Europe around April 2010
- Replies: 0
- Views: 90601
Shipping delay to Europe around April 2010
We came across shipments delay to European countries during the month of April 2010. All of us knows there was a major volcano eruption in Iceland and the air traffic in Europe is severely affected. On the other hand, we are also reported by customers in Eastern Europe and Russia that parcels arrive...
- Fri Apr 30, 2010 4:05 am
- Forum: Problems about Security Guard Solutions
- Topic: UD3E: how to erase the memory of the guard tour system
- Replies: 0
- Views: 50529
UD3E: how to erase the memory of the guard tour system
Model: UD3E, UD3E10T, SO4E
The records will be automatically erased after you
1) firstly, download the records to computer
2) secondly, take the reader to read tag again
once you read, system will be initialized.
The records will be automatically erased after you
1) firstly, download the records to computer
2) secondly, take the reader to read tag again
once you read, system will be initialized.
- Wed Apr 28, 2010 3:18 am
- Forum: Product Manual
- Topic: FQ Zoom Camera: Manual for 6027, 6030
- Replies: 0
- Views: 49731
- Tue Apr 27, 2010 10:56 am
- Forum: Product Manual
- Topic: FQ Zoom Camera: Back panel plan for 6027, 6030
- Replies: 0
- Views: 49470
FQ Zoom Camera: Back panel plan for 6027, 6030
Better have a check on the label of the cables, & panels because version may be different.
The camera is powered by 12V DC through the adapter cable.[/img]
The camera is powered by 12V DC through the adapter cable.[/img]
- Mon Apr 26, 2010 7:57 am
- Forum: Problems about Security Guard Solutions
- Topic: UD3E10T: Is there export and print function
- Replies: 0
- Views: 49903
UD3E10T: Is there export and print function
Model: SO4E, UD3E10T
- Tue Apr 20, 2010 1:30 pm
- Forum: Product Manual
- Topic: Manual of Ground Search Metal Detector YP3010B
- Replies: 0
- Views: 49495
- Tue Apr 20, 2010 9:04 am
- Forum: Product Manual
- Topic: Quick Starter Guide for CCTV Pan-Tilt Q Series
- Replies: 0
- Views: 49948
Quick Starter Guide for CCTV Pan-Tilt Q Series
Because there are several version of the same items, please take noted the very first step is to find the label on the pan-tilt about the correct operating voltage, any in-appropriate power supply will likely damage the circuit and void the warranty. The connection is simple, you suggest opening the...
- Mon Apr 19, 2010 11:39 am
- Forum: Administration
- Topic: How if I haven't received my items ordered?
- Replies: 0
- Views: 50386
How if I haven't received my items ordered?
Firstly, we would like to have your trust that we are genuine and honest seller. You have shipped your items out within an acceptable time-frame (unless we have informed you about special schedule in due course) and with proper protection and highest level of carefulness. Secondly, we hope you agree...
- Fri Apr 16, 2010 8:36 am
- Forum: Product Manual
- Topic: Manual for F89 Dual PIR and Microwave Outdoor Alarm Detector
- Replies: 0
- Views: 49489
- Thu Apr 15, 2010 6:07 am
- Forum: Product Manual
- Topic: User Guide of WS801 Wireless Pet Immune Motion Sensor
- Replies: 0
- Views: 49666
- Sun Apr 04, 2010 6:51 am
- Forum: Problems about Security Guard Solutions
- Topic: What is iButton?
- Replies: 0
- Views: 50051
What is iButton?
Introduction The iButton is a computer chip enclosed in a 16mm thick stainless steel can. Because of this unique and durable container, up-to-date information can travel with a person or object anywhere they go. The steel iButton can be mounted virtually anywhere because it is rugged enough to withs...
- Wed Mar 31, 2010 12:00 pm
- Forum: Standards
- Topic: What's the standard for RS485 CCTV Camera Pan-tilt Control
- Replies: 0
- Views: 90931
What's the standard for RS485 CCTV Camera Pan-tilt Control
RS485 is a 120 ohm half-duplex communication.
Maximum can support 32 devices on a bus.
Based on using 24V WG (0.56mm) twisted-pair, the maximum transmission distance as
2400 bps - 1800 m
4800 bps - 1200 m
9600 bps - 800 m
Maximum can support 32 devices on a bus.
Based on using 24V WG (0.56mm) twisted-pair, the maximum transmission distance as
2400 bps - 1800 m
4800 bps - 1200 m
9600 bps - 800 m
- Tue Mar 30, 2010 11:02 am
- Forum: Product Manual
- Topic: CD02SW: Manual for Wired Alarm Water Leak Detector
- Replies: 0
- Views: 49618
- Tue Mar 30, 2010 11:01 am
- Forum: Product Manual
- Topic: CD01SW: Manual for Water Leak Detector Standalone
- Replies: 0
- Views: 49101
- Fri Mar 26, 2010 12:08 pm
- Forum: Problems about Burglar Alarm
- Topic: GSM II Alarm Panel Installation Make Simple
- Replies: 0
- Views: 49541
GSM II Alarm Panel Installation Make Simple
Installation Simple Step by Step Our engineer will pre-configure the system for you; in that sense, your system ordered is also tested before shipped. However, the installation is straight forward. Step 1: Install all batteries to motion detector, remote controller and door sensor. Step 2: Put your ...
- Tue Mar 23, 2010 10:16 am
- Forum: Product Manual
- Topic: FO89FT: Guide Dual Tech PIR and MW Wired Motion Detector
- Replies: 0
- Views: 48766
- Sun Mar 21, 2010 11:28 pm
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: Button Arrangement of 4 Button Remote Control
- Replies: 0
- Views: 48677
CXG4D: Button Arrangement of 4 Button Remote Control
This button arrangement applicable to CXG4D, NHG9D and LMG3T series.
- Wed Mar 17, 2010 10:40 pm
- Forum: Problems about Security Guard Solutions
- Topic: Patrol ver 2.0 for UD300E and series Tour Guard System (ZIP)
- Replies: 0
- Views: 50724
Patrol ver 2.0 for UD300E and series Tour Guard System (ZIP)
Model: UD3E10T, UD300E, SO3E, SO3E10T, SOPV2, SO4E
http://www.best-china-security-supplies ... 100120.zip
http://www.best-china-security-supplies ... 100120.zip
- Tue Mar 16, 2010 9:22 pm
- Forum: Software Download
- Topic: NE Network Camera MPEG4 Series Mobile Java Client
- Replies: 0
- Views: 50071
- Tue Mar 16, 2010 1:15 pm
- Forum: Software Download
- Topic: NE Network Camera MPEG4 Series Manual OCX Plugins Install
- Replies: 0
- Views: 50228
NE Network Camera MPEG4 Series Manual OCX Plugins Install
This ocx plugin applicable to models: NE210S NE9138 NE9120, NE9120x27 NE9426, NE9426X10L8, NE9426X100L8 http://www.best-china-security-supplies.com/download/ne_mpeg4_ocx_install.rar Manual installation is only required when the ocx plug in cannot be downloaded automatically from network camera. Supp...
- Sun Mar 14, 2010 5:16 am
- Forum: Problems about Burglar Alarm
- Topic: 2262 Door Jumpers
- Replies: 0
- Views: 49116
- Thu Mar 11, 2010 9:17 pm
- Forum: Software Download
- Topic: XJ8108DH Series Software CD
- Replies: 0
- Views: 49868
XJ8108DH Series Software CD
http://www.best-china-security-supplies ... client.zip
The CD only contains various kinds of client software, there is no independent viewer for the DVR. Monitoring is basically using Internet Explorer.
The CD only contains various kinds of client software, there is no independent viewer for the DVR. Monitoring is basically using Internet Explorer.
- Fri Mar 05, 2010 7:15 am
- Forum: Problems about Network Camera
- Topic: NE Series IP Camera and Video Server audio setting
- Replies: 0
- Views: 49801
- Mon Mar 01, 2010 10:05 pm
- Forum: Product Manual
- Topic: Updated manual for burglar alarm panel LM0816 v.20100201
- Replies: 0
- Views: 49412
- Fri Feb 26, 2010 9:33 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: How configure the sms or call to phone when alarm
- Replies: 0
- Views: 50032
CXG4D: How configure the sms or call to phone when alarm
Assuming the panel has been ready. Make sure: 1) antenna fixed 2) power connected 3) at least one sensor (e.g. door contact or motion detector) has been learnt 4) the STATUS LED on the front panel is GREEN or flashing GREEN that means correct SIM card has been inserted and GSM network signal is dete...
- Wed Feb 24, 2010 12:02 pm
- Forum: Problems about Standalone DVR
- Topic: How iPhone support for Standalone DVR 8100 series
- Replies: 0
- Views: 49926
How iPhone support for Standalone DVR 8100 series
Applicable to models: XJ8104DH, XJ8104D5G XJ8108DH, XJ8108D5G please go Apple App Store and download a iPhone App called APlayer ( or Meye) and connecting your handheld to the DVR. Aplayer is a freeware for surveillance. Information about App Store. http://www.apple.com/iphone/iphone-3gs/app-store.h...
- Sat Feb 20, 2010 8:45 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: Wireless sensor normal jumper setting for Away Arm
- Replies: 0
- Views: 50008
CXG4D: Wireless sensor normal jumper setting for Away Arm
The correct jumpers of your sensors to work normal AWAY ARM setup.
Our PIR.
Our Door Sensor.
Our PIR.
Our Door Sensor.
- Sat Feb 20, 2010 7:58 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: How setup 24 hours zone sensors
- Replies: 0
- Views: 49258
CXG4D: How setup 24 hours zone sensors
There is a bug in the CXG4D and the original SMS configuration command is not working. Instead you need to set the jumpers of your sensors. Our PIR. http://www.best-china-security-supplies.com/images/motion_2262_24hr.jpg Our Door Sensor. http://www.best-china-security-supplies.com/images/door_2262_2...
- Fri Feb 19, 2010 12:24 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: I cannot turn off the siren via SMS
- Replies: 0
- Views: 48919
CXG4D: I cannot turn off the siren via SMS
i double check our set, the SMS is working. because it talks about the SMS, if one command working, there is very unlikely another one not working, as all inside the firm not parts. one possible reason probably the internal programming messed up, can you kindly do a reset of the alarm, configure the...
- Thu Feb 18, 2010 5:34 am
- Forum: Product Manual
- Topic: Quick Starter Guide for PT3030WQ Pan-tilt with Pelco Support
- Replies: 0
- Views: 49400
Quick Starter Guide for PT3030WQ Pan-tilt with Pelco Support
Because there are several version of the same items, please take noted the very first step is to find the label on the pan-tilt about the correct operating voltage, any in-appropriate power supply will likely damage the circuit and void the warranty. The connection is simple, you suggest opening the...
- Wed Feb 17, 2010 9:40 pm
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: Difference between CXG4D and NHG9D and LMG3T
- Replies: 0
- Views: 49290
GSM Alarm: Difference between CXG4D and NHG9D and LMG3T
While all three models are GSM Burglar Alarm, they are actually older and newer models with same basic operations with different enhancements. NHG9D and LMG3T are two older versions. NHG9D is a dual band version supporting only GSM 900 and 1800 while LMG3T is a tri-band version basically for USA tha...
- Fri Feb 12, 2010 1:04 pm
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: How set wired input NC for water leak detector TK102
- Replies: 0
- Views: 48825
CXG4D: How set wired input NC for water leak detector TK102
The diagram shows TK102 water leak detector http://www.best-china-security-supplies.com/images/tk102_02.jpg Then connecting the NC wires (blue and yellow) to alarm input liked this. http://www.best-china-security-supplies.com/images/wired_door_wiring.jpg By default it is Closed Circuit Triggered and...
- Tue Feb 09, 2010 12:06 pm
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: How set wired input NO and NC
- Replies: 0
- Views: 48804
CXG4D: How set wired input NO and NC
By default it is Closed Circuit Triggered, therefore, your sensors should be in a NO status. Basically most sensors no problem for being NC or NO. One example need to adjust is door contact, it's NC. So when your door open, door contact will not trigger alarm as it opens the circuit instead. While y...
- Tue Feb 09, 2010 11:55 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: Why I cannot change the zone name?
- Replies: 0
- Views: 48548
CXG4D: Why I cannot change the zone name?
Acttually so far the unit not support type 3,4,5,6,7 as old version manual said and once you put in SMS command to change zone type liked 3,4,5,6,7, things may mess up, i would suggest if you find alarm not normally operated, should have it reset to factory setting and re-learn the sensors and remot...
- Mon Feb 08, 2010 9:46 am
- Forum: Problems about Burglar Alarm
- Topic: CXG4D: How reset GSM Alarm to factory setting
- Replies: 0
- Views: 49662
CXG4D: How reset GSM Alarm to factory setting
1) turn off the power 2) press and hold the RESET button at the back, while power on the alarm until RED indicator on and then turn flashing 3) wait for a while 4) indicator stable and all settings should have been cleared * you can use a remote control to test if signal can be received by alarm, if...
- Sat Feb 06, 2010 6:39 am
- Forum: Problems about Standalone DVR
- Topic: SD08: Which port required by 8 Ch DVR H.264 SD08
- Replies: 0
- Views: 49499
SD08: Which port required by 8 Ch DVR H.264 SD08
These ports need to be port forwarded at router for SD08 8 Channels DVR
80, 9101, 9301, 9501, 9601, 9801
details can be referred to user guide page 30.
80, 9101, 9301, 9501, 9601, 9801
details can be referred to user guide page 30.
- Fri Feb 05, 2010 10:19 am
- Forum: Problems about Standalone DVR
- Topic: How check if USB flash working with SD08 DVR
- Replies: 0
- Views: 50868
How check if USB flash working with SD08 DVR
1) put in the USB Flash Drive
2) Inside HDD Management, check if USB disk is found.
2) Inside HDD Management, check if USB disk is found.
- Fri Feb 05, 2010 9:16 am
- Forum: Problems about Standalone DVR
- Topic: How setup XJ 8100 Series DVR for Dynamic IP DDNS
- Replies: 0
- Views: 49169
How setup XJ 8100 Series DVR for Dynamic IP DDNS
DDNS is supported by the DVR and the service is very popular. Setting up is straight forward, if not working, may use something else to help troubleshooting. 8100 series supports dyndns.org, we can also use other service to double check the problem. for example, no-ip.com 1) download no-ip client an...
- Wed Feb 03, 2010 9:03 am
- Forum: Product Manual
- Topic: UD3E10T: User Guide for Guard Tour System Patrol ver 2.0
- Replies: 0
- Views: 49110
- Wed Feb 03, 2010 8:24 am
- Forum: Product Manual
- Topic: CXG4D: GSM IV Alarm User Guide ver. 20100220
- Replies: 0
- Views: 49468
- Tue Feb 02, 2010 12:47 pm
- Forum: Problems about Burglar Alarm
- Topic: GSM IV Alarm: How setup wired sensors
- Replies: 0
- Views: 49190
GSM IV Alarm: How setup wired sensors
Connect the wires as shown. For Door Contact: http://www.best-china-security-supplies.com/images/wired_door_wiring.jpg For Motion Detector: http://www.best-china-security-supplies.com/images/wired_pir_wiring.jpg For CXG4D, remember to activate wired sensors by SMS 123456#66#1#ABC#1# 1) 123456 is pas...
- Tue Feb 02, 2010 10:55 am
- Forum: Problems about Security Guard Solutions
- Topic: UD3E10T Patrol ver 2.0 for Tour Guard System
- Replies: 0
- Views: 50052
- Tue Feb 02, 2010 8:14 am
- Forum: Software Download
- Topic: Client and Server Software for NE H.264 Series IP Camera
- Replies: 0
- Views: 50105
- Wed Jan 27, 2010 9:08 am
- Forum: Software Download
- Topic: Firmware Upgrade for 8CH DVR 8108 dh8108_100121_v8018_2.rar
- Replies: 0
- Views: 50178
- Sun Jan 24, 2010 11:16 am
- Forum: Product Manual
- Topic: User Guide for wireless keypad for GSM Alarm
- Replies: 0
- Views: 49065
- Sat Jan 23, 2010 7:06 am
- Forum: Product Manual
- Topic: Manual for Standalone Mobile DVR 4CH JA5004
- Replies: 0
- Views: 48744
- Fri Jan 22, 2010 12:58 pm
- Forum: Problems about Burglar Alarm
- Topic: GSM IV Alarm: How enable the power on/off notification
- Replies: 0
- Views: 48876
GSM IV Alarm: How enable the power on/off notification
Applicable to models CXG4D, JAG4D
for the power notification, please try
123456#40#your_phone_no#1#
check if it can be enabled.
for the power notification, please try
123456#40#your_phone_no#1#
check if it can be enabled.
- Fri Jan 22, 2010 10:32 am
- Forum: Problems about Burglar Alarm
- Topic: Troubleshooting GSM IV Alarm
- Replies: 0
- Views: 49130
Troubleshooting GSM IV Alarm
Step by step: - Again, start from simple - make sure you SIM card work by putting in your mobile phone, check it can dial and send and receive SMS. - put SIM card into GSM IV Alarm, make sure contact fit the contact points - fasten the antenna, also make sure fastened, not loosen - put in the power ...
- Fri Jan 22, 2010 10:08 am
- Forum: Physical Security
- Topic: Troubleshooting Guide for PD Low Speed Dome CCTV System
- Replies: 0
- Views: 49550
Troubleshooting Guide for PD Low Speed Dome CCTV System
Step by step: - start from simpliest setup - connect only the power cord, make sure 24V AC with 2A is connecting (recommend confirming the voltage and current by a handheld meter) - the speed dome should start with a self-test, you'll see it rotating horizontally and vertically - disconnect the powe...
- Wed Jan 20, 2010 10:37 am
- Forum: Problems about Network Camera
- Topic: How to choose my network camera?
- Replies: 0
- Views: 50579
How to choose my network camera?
1) do you want it to move fast (fast and slow different price, low and high speed dome will be very different priced) 2) how far and how dark do you want to see that affect your camera ( this includes camera resolution, with infra-red or not, lens type, etc) 3) frankly speaking, what's your budget? ...
- Wed Jan 20, 2010 10:24 am
- Forum: Software Download
- Topic: 8100 Series DVR ActiveX PlugIn Manual Installation
- Replies: 0
- Views: 49973
- Tue Jan 12, 2010 3:08 am
- Forum: Problems about Standalone DVR
- Topic: What client software for 81 Series Standalone DVR
- Replies: 0
- Views: 49691
What client software for 81 Series Standalone DVR
81 Series Standalone DVR supports three mobile platforms: Windows Mobile, Symbian and iPhone.
There are specific developed client software for WM and Symbian. Please contact support for them.
For iPhone, go App Store and download freeware called APlayer.
There are specific developed client software for WM and Symbian. Please contact support for them.
For iPhone, go App Store and download freeware called APlayer.
- Tue Jan 12, 2010 12:40 am
- Forum: Problems about Burglar Alarm
- Topic: How do are the alarm sensors powered?
- Replies: 0
- Views: 50999
How do are the alarm sensors powered?
Most popular alarm sensors include motion detector, door contact, smoke detector and so on. For powering, 1) For wireless alarm, mostly using batteries, the kind of batteries depends on different models e.g. AA, AAA, 123A, etc. Battery life will be affected by usage and the power consumption of the ...
- Mon Jan 11, 2010 1:22 pm
- Forum: Product Manual
- Topic: User Guide of NE Series Network Camera Speed Dome
- Replies: 0
- Views: 48665
- Mon Jan 11, 2010 1:06 pm
- Forum: Product Manual
- Topic: User Guide of RF Hotel Lock Setup
- Replies: 0
- Views: 48269
- Mon Jan 11, 2010 1:05 pm
- Forum: Product Manual
- Topic: User Guide of RF Hotel Locks Management System
- Replies: 0
- Views: 48118
- Sat Jan 09, 2010 4:32 am
- Forum: Security Cameras
- Topic: CCD or CMOS Camera
- Replies: 0
- Views: 91455
CCD or CMOS Camera
Image sensor is the most important component for any CCTV security camera. This image sensor converts light into a digital signal. The two most basic types today are CCD (Charged Coupled Devices) and CMOS (Complementary Metal Oxide Semiconductor) sensors. For those novice or seasoned technie, it som...
- Thu Jan 07, 2010 1:05 am
- Forum: Product Manual
- Topic: User Guide of Burglar Alarm 8+8 LM808A
- Replies: 0
- Views: 48733
- Fri Jan 01, 2010 3:10 am
- Forum: Product Manual
- Topic: User Guide of ENF Series CMOS IP Camera
- Replies: 0
- Views: 48432
- Wed Dec 30, 2009 8:48 am
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: connecting hardwired sensors to alarm panel
- Replies: 0
- Views: 48765
GSM Alarm: connecting hardwired sensors to alarm panel
By default, the GSM alarm is using NC. That's circuit open will alarm. Most wired sensors (door contacts, PIR motion detectors, gas leakage detector, smoke detector, etc) have two wires. Connecting one wire to i1, i2, or i3 of the alarm panel, and another one wire to the GROUND of alarm panel. That'...
- Wed Dec 30, 2009 8:35 am
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: GSM Network worldwide
- Replies: 0
- Views: 49120
GSM Alarm: GSM Network worldwide
Model: NH900A, NH900B, NH1900A, NH1900B, NH1900C We try to compile a list of GSM network using around the world. GSM 900 & 1800: Most european countries liked UK, Ireland, Spain, Estonia, Lithuania, Hungary, Slovenia, Slovakia, Russia GSM 1900: USA, Mexico & Canada, many South American count...
- Wed Dec 30, 2009 8:27 am
- Forum: Problems about Security Guard Solutions
- Topic: Guard Tour: How many scans does the YA recorder hold?
- Replies: 0
- Views: 49573
Guard Tour: How many scans does the YA recorder hold?
The YA series is capable of storing up to 10000 scans in its memory, depends on model.
- Wed Dec 30, 2009 8:26 am
- Forum: Problems about Security Guard Solutions
- Topic: Guard Tour: Where should I place the buttons / RFID Tags?
- Replies: 0
- Views: 50077
Guard Tour: Where should I place the buttons / RFID Tags?
Buttons should be placed in inconspicuous places especially when they are in a public place. Their small size makes it very easy for them to not be noticed. The other consideration is the route the Guard takes when going from button to button. The route should be designed to provide the maximum patr...
- Tue Dec 29, 2009 10:37 am
- Forum: Problems about Burglar Alarm
- Topic: GSM II Alarm: How troubleshoot remote controller?
- Replies: 0
- Views: 49445
GSM II Alarm: How troubleshoot remote controller?
may i clarify if all your keyfob the same? please compare their case color, material and keys arrangement. and when you boot your alarm, when the status still red, you press the 'bell' button on the keyfobs, does the red light flash? ( that means the signal from the keyfob with problem can received ...
- Tue Dec 29, 2009 10:22 am
- Forum: Product Manual
- Topic: Connecting WQ3030 Pan-tilt Unit with PELCO Decoder
- Replies: 0
- Views: 48631
Connecting WQ3030 Pan-tilt Unit with PELCO Decoder
the connection is simple. do you see label adhered on the cables? most importantly, you should ONLY connect 24V AC to the cable labelled 24V AC, this is the power cord. ** other voltage will destroy circuit ** it's using RS 485 to control, that takes only 2 wires, do you see the wires with label 485...
- Tue Dec 29, 2009 8:41 am
- Forum: Product Manual
- Topic: Manual of Guard Tour Management System ver 3.0
- Replies: 0
- Views: 48967
- Mon Dec 28, 2009 11:24 am
- Forum: Product Manual
- Topic: GSM Alarm: back-panel of GSM Alarm
- Replies: 0
- Views: 48831
GSM Alarm: back-panel of GSM Alarm
The diagram of back-panel is valid for model NHG9D, NHG9Q, LMG3T
The diagram of back-panel is valid for model JAG4D, CXG4D.
The diagram of back-panel is valid for model JAG4D, CXG4D.
- Mon Dec 28, 2009 11:14 am
- Forum: Problems about Burglar Alarm
- Topic: GSM Alarm: How many wired doors and windows sensors support?
- Replies: 0
- Views: 48828
GSM Alarm: How many wired doors and windows sensors support?
Actually there is no limit for number of wired sensors. You can connect them in series or parallel for your convenience. there are 3 wired zones. at this moment, the GSM Alarm supports NC by default. In the future version, it will enhance to accommodate both NC and NO configurable. Any device that c...
- Mon Dec 28, 2009 12:27 am
- Forum: Product Manual
- Topic: GSM IV Alarm: Amendment to user manual
- Replies: 0
- Views: 48467
GSM IV Alarm: Amendment to user manual
Due to the continuous enhancement on the burglar alarm system, the manual on your hand may not updated with the system, please take a look on this article for some updated information. 1. Change of Zone Type The zone type of this version cannot be changed. Please don't use those command inside manua...
- Wed Dec 23, 2009 12:10 pm
- Forum: Product Manual
- Topic: Manual for 16CH H.264 DVR Card BY68
- Replies: 0
- Views: 48872
- Tue Dec 22, 2009 1:32 am
- Forum: Software Download
- Topic: Net Viewer for XJ7116 series DVR
- Replies: 0
- Views: 49731
- Sat Dec 19, 2009 1:29 pm
- Forum: Product Manual
- Topic: Manual for wired and wireless Burglar Alarm Control Panel 16
- Replies: 0
- Views: 48922
- Mon Dec 14, 2009 3:42 am
- Forum: Software Download
- Topic: Mobile Client Software for SD08 DVR
- Replies: 0
- Views: 49696